Zeiss Axiovert 200 Operating Manual

Also see for Axiovert 135M: Operating manual Instructions for use

Contents

Zeiss Axiovert 200 Operating Manual Manual pdf 105 page image

OPERATIONAxiovert 200 Documentation Carl ZeissB 40-080 e 03/01 3-45Order No. / Viewed with / Intermediate / Direction of Viewing direction,Description Switch position image / Monitor motion of object schematic000000-1005-824 100% docBaseportCamera adapters working without intermediate imaging do not change the orientation of the image.This also applies to the Frontport with adapters V200 T2 2.5x for SLR used on Frontport 000000-1005-869 and video adapter V200 C 2/3” 0.63x used on Frontport 000000-1071-171.The use of Optovars 000000-1005 and 000000-1005-856, too, does not change image orientation.The above description also applies to any other specimen.3.4.2 Photomicrography with SLR cameraThe Axiovert 200 (manual) and Axiovert 200 M microscopes permit the beam path to be switched to100% vis (visual observation through eyepieces and an open position for activation of the Sideport tothe right or left), 100% Frontport (port pointing to the front for photomicrography) or 100% Baseport(port pointing downwards).Since this is a 100% switching position,simultaneous visual observation duringphotography is not possible.The 2.5x camera adapter and the camera-specificT2 adapter permit commercially available 35 mmSLR cameras to be connected to the microscope.• Remove dust cover or camera lens from thecamera housing (3-25 /1).• Attach appropriate T2 adapter (3-25/2) to thecamera housing.• Remove dust cover from the 2.5x cameraadapter (3-25/3).• Screw 2.5x camera adapter into the T2 adaptervia the thread.• Remove dust cover from the camera port. Fig. 3-25 Connection of a SLR camera