Menu
Zaxcom ZFR400 User Manual
                             | |
Contents
| 
Zaxcom ZFR400 ZaxNet Menu15ZaxNet Receive Before Transmit TimeThis menu adjusts the state of the ZaxNet transceiver.This menu also sets how long after boot-up up the ZFR400 will search for ZaxNet time code before it beginstransmitting its audio over ZaxNet for monitoring purposes. This is so the ZFR400 can lock to ZaxNet timecode source before the unit will send confidence audio over ZaxNet.Receive only mode.The ZaxNet transceiver will only receive ZaxNet and NOT go intotransmit mode. Therefore no ZaxNet TC and/or audio will betransmitted. This setting shuts off the ZaxNet transmitter.Receive then Transmit mode.After boot up the ZaxNet transceiver will search for aZaxNet signal for the selected time so it can receive andlock time code before it begins to transmit TC andconfidence audio.This is adjustable from 1 to 20 Seconds.Transmit only mode.The ZaxNet transceiver will only transmit ZaxNet TC andaudio and will NOT receive wireless TC or ZaxNetcommands. This setting shuts off the ZaxNet receiver.RX TO TX TIME:OFF (NORMAL RX)ZAXNET RX TO TX:0 SEC: TX ONLYZAXNET RX TO TX:20 SEC |
Related manuals for Zaxcom ZFR400
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved