8Duration of the selected programmeAfter selecting a programme, the duration is displayedin hours and minutes (for example 22..0055).The duration is calculated automatically on the basis ofthe maximum recommended load for each type offabric.After the programme has started, the time remaining isupdated every minute.Drying timeThe selected drying time is displayed in minutes.After starting the programme, the remaining time isupdated every minute.Delayed startThe selected delay (23 hours max) set by means of therelevant button appears on the display for 3 seconds,then the duration of the previously selected programmeis displayed.The countdown is updated every hour and, when remainthe last 2 hours, each 30 min. Incorrect option selectionIf an option which is not compatible with the set washprogramme is selected, the message Err is displayed for2 seconds.Alarm codesIn the event of operating problems, some alarm codescan be displayed, for example EE2200 (see paragraph“Something not working”).End of programmeWhen the programme has finished a flashing zero isdisplayed. The door can be opened when (DOOR)pilot light has gone out and if the (RINSE HOLD)option has not been selected.