Zanussi ZOB550WL User Manual

Also see for ZOB550WL: Specifications User manual

Zanussi ZOB550WL User Manual Manual pdf 31 page image

31Electrical ConnectionThe oven is designed to be connected to 230 V (50 Hz)electricity supply.The oven has an easily accessible terminal blockwhich is marked as follows:Letter L - Live terminalLetter N- Neutral terminalor E-Earth terminalTHIS OVEN MUST BE EARTHEDThe cable used to connect the oven to the electricalsupply must comply to the specifications givenbelow.It is necessary that you install a double pole switchbetween the oven and the electricity supply (mains),with a minimum gap of 3mm between the switchcontacts and of a type suitable for the required loadin compliance with the current rules.The switch must not break the yellow and greenearth cable at any point.the yellow and green earth cable should be 2-3 cmlonger than the other cables.ImportantAfter installation and connecting, the cable must beplaced so that it cannot at any point reach atemperature of more than 50°C above the ambienttemperature.Before the oven is connected, check that the mainfuse and the domestic installation can support theload and that the power supply is properly earthed.The manufacturer declines any responsibilityshould these safety measures not be carriedout.For Europe use onlyMin. size Cable/ Cable / flex type Fuseflex1.5 mm 2 H07 RN-F, H05 RN-F, 13 AH05 RR-F, H05 VV-F,H05 V2V2-F (T90),H05 BB-FConnection Min. size Cable / flex Fusevia Cable/flex type13 A socket 2.5 mm 2 3 core 13 A min.outlet butyl13 A spur box insulatedOven 2.5 mm 2 PVC/PVC 15 A min.Control twin andCircuit earth 20 A max.For UK use only