Zamel EXTA ASM-02 Instruction Manual

Zamel EXTA ASM-02 Instruction Manual Manual pdf 1 page image

STAIRCASE LIGHTING TIMER ASM-02 INSTRUCTION MANUALZakład Mechaniki i ElektronikiZAMEL sp.j.J.W. Dzida, K. Łodzińskaul. Zielona 27, 43-200 Pszczyna, PolandTel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04www.zamelcet.com, e-mail: marketing@zamel.plVER. 001_16.02.2009FEATURESTECHNICAL PARAMETERSDESCRIPTIONAPPEARANCEASM-02Input (supply) terminals: L, NInput rated voltage: 230 V~Input voltage tolerance: from -15 to +10 %Nominal frequency: 50 / 60 HzRated power consumption: 35 mARelease terminals: IN, IN, INRelease control current: 300 μATime adjustment range: from 2 sec to 10 min (rotational potentiometer)Time accuracy adjustment: ±10 %Time repeatability adjustment: ±5 %Power/relay supply indicator: red LEDOutput relay parameters: 1NO - 16 A / 250 V AC1 4000 VANumber of terminal clamps: 8Section of connecting cables: from 0,2 to 2,50 mm2Ambient temperature range: from -20 to +45 oCOperating position: freeMounting: TH35 rail (PN-EN 60715)Protection degree: IP20 (PN-EN 60529)Protective class: IIOvervoltage category: IIPollution degree: 2Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mmWeight: 76 gReference standards: PN-EN 60669-1; PN-EN 60669-2-1PN-EN 61000-4-2,3,4,5,6,11● Staircase lighting control,● operating time adjustment from 2 secto 10 min,● power supply indicator – red LED,● cooperation with monostable push-buttons equipped with illuminationlamps,● anti blocking function,● cooperation with 4-wire installation,● voltage relay output - one NO contactmax 16 A capacity,● monomodular casing,● TH 35 DIN rail installation.The staircase lighting time delayswitch ASM-02 is used to control lightingdevices on staircases and corridors. Afterreleasing the system it switches on thelighting for the preset time by the user.After that it switches off automatically.The operating time can be adjusted from2 s to 10 min by means of the potentio-meter placed on the front panel of thedevice. The device is equipped with ananti-blocking function. The staircase li-ghting time delay switch ASM-02 can beused as standard time delay relay.The device is designedfor one-phase instal-lation and must be in-stalled in accordancewith standards validin a particular country.The device should beconnected according to the details inc-luded in this operating manual. Installa-tion, connection and control should becarried out by a qualified electrician staff,who act in accordance with the servicemanual and the device functions. Disas-sembling of the device is equal with aloss of guarantee and can cause electricshock. Before installation make sure theconnection cables are not under voltage.The cruciform head screwdriver 3,5 mmshould be used to instal the device. Im-proper transport, storage, and use of thedevice influence its wrong functioning.It is not advisable to instal the device inthe following cases: if any device part ismissing or the device is damaged or de-formed. In case of improper functioningof the device contact the producer.CAUTIONOutput (load) relayTime adjustmentPower/relay supply indicatorInput supply terminal (L) Input supply terminal (N)terminals (11,11,14)Release terminals(IN,IN,IN)

/ 2

Related manuals for Zamel EXTA ASM-02