Menu
ZIPPER MASCHINEN ZI-HDR40V-AKKU User Manual
Also see for ZI-HDR40V-AKKU: User manual
                                           | |
Contents
| 
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 30ZI-HDR40V-AKKU16 OPERATIONDevice to be operated in a perfect state only. Inspect the device visually every time it is to be used.Check in particular the safety equipment, electrical controls, electric cables and screwed connectionfor damage and if tightened properly. Replace any damaged parts before operating the device.N O T I C EThe batteries are not fully charged on delivery. Prior to initial operation, charge the batteriesfully. See chapter charger.16.1 Operation instructionsW A R N I N G• Unplug battery before all maintenance and settings and cleanings!• Never remove the battery while the machine is running.• If the power tool is damaged or vibrates unusually, it must be repaired by aservice centre before it is used again.• Do not operate the machine with components rated less than the max. workingpressure16.2 Operation• Insert the loaded battery into the battery compartment and close it.• Fill the water tank with water or connect thehigh pressure generator directly to a watersupply.• Flow rate / working pressure can be adjusted with the selector switch.OFF: OffLOW: 2 l/min at 50 barHIGH: 4 l/min at 70bar• Press the safety lock and the trigger on the trigger gun and thewater jet will be activated |
Related manuals for ZIPPER MASCHINEN ZI-HDR40V-AKKU
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved