Remove the lower door.Loosen the lower pin.On the opposite side:Install the lower pin.Install the lower door.Install the upper door.Tighten the spacer andthe upper pin.Ventilation requirementsThe airflow behind theappliance must be suffi-cient.5 cmmin. 200cm 2min.200cm 2Installing the applianceCaution! Make sure that the mains cable canmove freely.Do the following steps:xx1 If necessary cut theadhesive sealing stripand then apply it to theappliance as shown infigure.122 Install the appliancein the niche.Push the appliance in thedirection of the arrows (1)until the upper gap coverstops against the kitchenfurniture.Push the appliance in thedirection of the arrows (2)against the cupboard onthe opposite side of thehinge.44mm4mm3 Adjust the appliancein the niche.Make sure that the dis-tance between the appli-ance and the cupboardfront-edge is 44 mm.The lower hinge cover (inthe accessories bag)makes sure that the dis-tance between the appli-ance and the kitchen fur-niture is correct.Make sure that the clear-ance between the appli-ance and the cupboard is4 mm.Open the door. Put thelower hinge cover in posi-tion.II4 Attach the applianceto the niche with 4screws.24