Menu
Z-Com ZMAX-8210-E User Manual
                                                 | |
Contents
| 
Figure 23 Retrieve and Backup Settings From the“Backup / Restore Settings”，by clicking“Backup”，a pop-menu will appear,suggesting you enter:C:\mercury.cfg. After “Confirm”, the mercury.cfg will be saved to yourhard disc. From the“Backup / Restore Settings”，by clicking“Backup”，a pop-menu will appear,suggesting you enter:C:\mercury.cfg. After “Retrieve”, the zmax8210 will retrieve your backupfile.Backup and Retrieve Files via FTP： Enter the command ftp 192.168.1.1 admin and password, After successful commanding, enter“get mercury.cfg”. If the upgrade is successful, enter “getmercury.cfg” and you’ll see the information as below. A file will be saved to your PC folderfollowing C:\mercury.cfg； Enter“put mercury.cfg”，the file will be loaded to your ZMAX-8210.Note：C:\>ftp 192.168.1.1Connected to 192.168.1.1220 (vsFTPd 1.1.3)User (192.168.1.1:(none)): admin331 Please specify the password.Password:230 Using binary mode to transfer files. Login successful. Have fun.ftp> get mercury.cfg200 PORT command successful. Consider using PASV.150 Opening BINARY mode data connection for /mnt/ramd/ mercury.cfg (11411 bytes).226 File send OK.ftp: 收到 11411 字节，用时 0.00Seconds 11411000.00Kbytes/sec.ftp> put zmax8200.cfg200 PORT command successful. Consider using PASV.150 Ok to send data.226 File receive OK.ftp: 发送 11411 字节，用时 0.02Seconds 713.19Kbytes/sec.ftp> quit221 Goodbye.Chapter 5 Management - 23 - |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved