Yamaha MSH-420 Owner's Manual

CARRYING HOLDER for MARCHING SNARE DRUMOWNER’S MANUALThank you for purchasing the Yamaha MSH-420/220 CarryingHolder for Marching Snare Drum.Please read this Owner’s Manual throughly before use.Printed in Japan* MSH-420 2500411 R2 Once bolt positions have been determined,tighten all bolts firmly. If the holder is used withloose bolts, the instrument will be unstable whileplaying and may suddenly overturn or dropcausing injury. It also may move about causingunwanted noise. Before using the carryingholder, check all bolts and firmly tighten anyloose bolts found. Wing nuts should be tightened by hand only. When removing the holder or removing theinstrument from the holder, do so gently. Do notdrop or throw the instrument. Do not the stand in the rain. If the stand becomeswet, use a soft dry cloth to wipe the stand assoon as possible. Always use a soft dry cloth to clean the stand as apart of periodic maintenance. Never use thinner,benzene, or other similar solvents to clean the stand.CAUTIONNames of Parts Snare Drum MountingBefore assembling the carrying holder, check to make sure that all therequired parts have been provided. Mount the snare drum by making the slide-attachment on the carrying holder slidebase. Tighten the clamp screw to secure the snare drum.Holder (Upper)Shoulder restsUpright Frame (Upper)Hexagonal WrenchHolder (Lower)Upright Frame (Lower)Slide-attachmentSlide baseClamp screwSnare drumWrench

/ 2

Related manuals for Yamaha MSH-220