www.dadehpardazan.ir 88594014-152.1 Installation Environment and Applicable Standards2-32 Installation Impact Resistance: The linear servomotor will with stand the followingimpact acceleration. Installation site: An environment that satisfies the following conditions• Indoors and free of corrosive or explosive gases• Well-ventilated and free of dust and moisture• Facilitates inspection and cleaning• Free of high magnetic field2.1.2 SERVOPACK Installation Environment Surrounding air temperature: 0C to 55C Ambient humidity: 90% RH or less (with no condensation) Altitude: 1,000 m or less Vibration resistance: 4.9 m/s2 Shock resistance: 19.6 m/s2 Installation Precautions• Mounting in a Control PanelTo prevent the temperature around the SERVOPACK from exceeding 55C, take intoaccount the size of the control panel, the layout of the SERVOPACK, and the coolingmethod. For details, refer to 2.4 SERVOPACK Installation.• Mounting Near a Heating UnitTo prevent the temperature around the SERVOPACK from exceeding 55C, suppressradiant heat from the heating unit and temperature rise due to convection.• Mounting Near a Vibration SourceTo prevent vibration from being transmitted to the SERVOPACK, install a vibrationisolator underneath the SERVOPACK.Servomotor model Impact accelerationSGLGWSGLFWSGLTW 196 m/s2 twiceSGLC 98 m/s2 twice
