August 20155-17Xerox® WorkCentre® 5890 Family PL 10.12Parts ListsPL 10.12 Inverter Decurler Assembly(2 of 4)Item Part Description1 – Inverter output assembly (P/O PL10.11 Item 23)2 – Post fuser gear (20T) (REF: PL10.15 Item 7)3 013E36980 Bearing4 – Dog drive assembly (REF: PL10.15 Item 6) (REP 10.12)5 – Idler gear (20T) (REF: PL 10.15Item 4)6 – Tri-roll knob (REF: PL 10.15 Item12)7 – Inverter gate (Not Spared) (REP10.11)8 – Tri-roll shaft (Not Spared) (REP10.12)9 006K29971 Post fuser exit roller (W/O TAG004) (REP 10.12)– – Post fuser exit roller (P/O PL 10.12Item 24) (W/TAG 004)10 – Tri-roll guide (P/O PL 10.11 Item23) (REP 10.12)11 – Front gravity finger (P/O PL 10.11Item 23)12 – Gravity gate finger (P/O PL 10.11Item 23)13 – Rear gravity gate finger (P/O PL10.11 Item 23) (REP 10.12)14 – Upper baffle (P/O PL 10.12 Item22)15 – Idler roll (P/O PL 10.12 Item 22)16 – Idler roll shaft (P/O PL 10.12 Item22)17 – Spring (P/O PL 10.12 Item 22)18 – Post fuser jam clearance latch(REF: PL 10.15 Item 11)19 – Inverter sensor (Q10-105) (P/Oitem 22) (65-90 ppm) (NOTE) (REP10.20)20 – Hinge pin (P/O PL 10.12 Item 22)21 – Torsion spring (P/O PL 10.12 Item22)22 038K17843 Upper baffle assembly (45-55 ppm)(REP 10.7)– 038K23890 Upper baffle assembly (65-90 ppm)23 123E02481 Upper LED (REP 10.18)24 – Inverter transparency feed kit (REF:PL 31.12 Item 2) (W/TAG 004)NOTE: The 45-55 ppm machines do not have the invertersensor.www MK-Electronic de
