August 20155-126 Xerox® WorkCentre® 5890 FamilyPL 70.30Parts ListsPL 70.30 Bypass Tray and Left DoorAssemblyItem Part Description1 050K67883 Bypass tray and left door assembly(45-55 ppm) (REP 70.2)2 – Left door (P/O PL 70.30 Item 1)3 110E19990 Left door interlock (S01-305)4 121E25680 Bypass feed solenoid (SOL81-050)(REP 80.7)5 – Feed head assembly (P/O PL 70.30Item 1) (REP 80.13)6 – Feed head (P/O PL 70.30 Item 5)(REP 80.13)7 130E20360 Bypass empty sensor (Q75-320)(REP 80.17)8 – Hinge pin (Not Spared)9 – Spring retainer (P/O PL 70.30 Item11)10 809E57640 Spring drive gear11 807E05311 Drive gear assembly (REP 80.14)12 – Bypass tray (P/O PL 70.30 Item 1)13 809E84190 Ground spring14 – Feed head top cover (P/O PL 70.30Item 5)15 – Feed roll (P/O PL 70.30 Item 21)(REP 80.15)16 – Nip roll (P/O PL 70.30 Item 5)17 – Left door cover (P/O PL 70.30 Item2)18 – Retard pad bracket (P/O PL 70.30Item 21)19 – Retard pad assembly (P/O PL70.30 Item 21) (REP 80.16)1C 050K67893 Bypass tray and left door assembly(65-90 ppm) (REP 70.2)20 – Retard pad spring (P/O PL 70.30Item 21)21 059K39862 Feed roll and retard pad assembly(See NOTE 2) (REP 80.16)22 – Solenoid spring (P/O PL 70.30 Item4)23 003E78141 Interlock cover24 130E12770 Tray 1 feed sensor (Q81-101)/Tray2 feed sensor (Q81-102) (REP80.18)25 130E11610 Wait Sensor (Q81-100) (65-90ppm) (See NOTE 1) (REP 80.11)26 – Nip roll (Not Spared)27 – Not used28 – Pre-reg nip roll spring (P/O PL70.30 Item 29)29 – Skew bypass tray spares kit (x2spring) (REF: PL 31.13 Item 7) (W/TAG 048)30 – Nip roller (Not Spared)31 – Shaft (Not Spared)32 – Lower cover (Not Spared)33 – Front pre-nip roll spring (NotSpared)34 – Middle pre-nip roll spring (NotSpared)NOTE: 1.Refer to PL 80.15 Item 3 for the 45-55 ppm waitsensor.NOTE: 2.HFSI. To reset the HFSI count, refer to dC135.www MK-Electronic de
