Xerox X2 User Manual

Also see for X2: User guide System introduction

Contents

Xerox X2 User Manual Manual pdf 22 page image

10 Getting to Know Your ColorgrafX X2Printer components (con’t)Operations panel (con’t)The ColorgrafX X2 has three top-level menus, andfour if the Color Direct option is installed. The buttonfunctionality is indicated by the display.1. The default display, which is initially displayed,identifies the installed media (type and size) aswell as provides an illustration of approximateusage.Note: The media type and size MUST be set at theoperation panel, and the media must be installedbefore setting further optionsAlso, note that the illustration to the right is whatwill appear if 360 Presentation Paper is set on therear roll and 720 Presentation Paper on the frontroll..This display has the following functionality:• Button 1, the top button on the right side of theLCD. Button 1 provides the Menu button.Pressing the Menu button shifts the printer tomenu mode, from which you can select printingoptions.• Button 2, the 2nd button on the right side of theLCD is not used for this display.• Button 3, the 3 rd button on the right side of theLCD. This button is used to change the frontmedia type.• Button 4, the 4th button on the right side of theLCD. This button is used to change the rearmedia type.2. The second display, accessed using the rightarrow from the default display, has the followingfunctionality:READY MENUÎR: 360 PRES 36 ggg ÎF: 720 PRES 54 ggg Î