Xerox Phaser 790DP Getting Started Manual

Also see for Phaser 790: Service manual Service manual Brochure & specs Specifications Documentation

Xerox Phaser 790DP Getting Started Manual Manual pdf 19 page image

Installing the 2 Tray Module 1. Setting up the Phaser 790Xerox Phaser 790 Getting Started 1-9Installing the 2 Tray Module (optional)If you ordered the 2 Tray Module, perform the following steps. If you did notorder the 2 Tray Module, go to the Unpacking the Printer procedure.WARNINGYou will need at least two people to remove it from the carton.1. Open the 2 Tray Module carton.2. Remove the styrofoam and the plastic wrap from the top of the 2 TrayModule.3. With a person on each side of the box, grasp the crossbars in thelocations indicated by the labels.301098a4. Lift the 2 Tray Module from the box and place it the selected location.5. Lock the front casters as shown below.301007B-WOL0