Xerox Document Centre 240 DC User Manual

Also see for 255 DC: User guide Reference guide Information manual

Contents

Xerox Document Centre 240 DC User Manual Manual pdf 54 page image

Page 42 Xerox Document Centre User GuideAdding coversTypical ApplicationAdd covers to any set of documents.Procedure1. Load the cover stock into the Bypass Tray or anyappropriate paper tray.2. Load your originals into the Document Feeder.3. Make your programming selections by touching thescreen. The most common selections are on the BasicCopying Tab (Output, 2-sided Copy, Reduction/Enlargement, and Paper Supply).4. Use the keypad to enter the number of copy sets.5. Depending on the configuration of your machinepress the More Copy Features Tab or the ImageAdjustment Tab.6. Press the Image Quality button then select theappropriate Original Type.7. Press the Output Format Tab and select Covers.Select where you want the cover positioned - Front,Back, or Front and Back then press the Save button.(Refer to the Reference Guide for more informationon Covers).8. Press Output Cover Images to select the sides imagedfor the cover and press the Save button.9. Press the Cover Stock button to select the tray wherethe cover stock is loaded.10.Press the Start ( ) button.