Xerox Document Centre 240 DC User Manual

Also see for 255 DC: User guide Reference guide Information manual

Contents

Xerox Document Centre 240 DC User Manual Manual pdf 40 page image

Page 28 Xerox Document Centre User GuideLoading paperLoading Paper in Trays 1 - 41. Pull out the paper tray.2. Load the paper neatly in the tray. Do not load paperabove the maximum fill line mark on the edge guide.3. Ensure that the edge guides are against the top,bottom, and side edges of the paper.4. Push in the paper tray.A pop-up screen may appear on the screen asking youto confirm the paper stock settings or to load therequired paper for the tray. Confirm or change thepaper and size descriptions as required.Loading paper in Tray 5, the Bypass TrayUse Tray 5 to load special or odd-size stock. Insert paperas shown. Do not load paper above the maximum fillline. Pull out the extension bar to accommodate paperthat is longer than the tray. Confirm or change the paperand size descriptions as required.Loading Paper in Tray 6, the High Capacity FeederTo load paper, open the cover and wait for the tray tolower. When the paper has been loaded, close the coverto raise the tray. Tray 6 can only handle 8.5 x 11 inch orA4 size paper.NOTE Use the labels for instruction on how to orient specialstock such as transparencies, labels, or hole-punchedstock.056800086C-LKSExtensionbarInsert the paperfor Tray 5Insert paper for Tray 6.