Xerox DocuPrint 96 IPS System Overview Manual

Also see for DocuPrint 180 IPS Series: Message guide User guide Installation planning guide Reference guide Troubleshooting guide

Contents

Xerox DocuPrint 96 IPS System Overview Manual Manual pdf 56 page image

PRINTERS4-14 XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDEOptions enabling third-party feeding and finishingThe Input Enablement and bypass transport devices are offered asoptional components. These options allow you to customize yourprinter for increased efficiency and specialized applications, such asroll feed and finishing devices.Programmable bypass transport The ability to add a third-party finisher to your 96/4635/180 IPS ismade possible by the programmable bypass transport option.Finishers increase your production capabilities by providing a widevariety of finishing choices (for example, slitting, booklet making,binding, and so forth).Connected to the printer’s last feeder/stacker module, theprogrammable bypass transport allows finishers to interface directlywith your 96/4635/180 IPS. It accepts all paper stocks within the 96/4635/180 range and accommodates simplex and duplex printing.The programmable bypass transport meets the Xerox DocumentFeeding and Finishing Architecture (DFA) specifications.Input Enablement kit Adding a third-party feeder to your 96, 4635, or 180 IPS is madepossible by the Input Enablement option. The 96/4635/180 IPSaccepts cut sheets from the feeding device through an entry slot atthe lower right of the last feeder/stacker module.The input enablement option provides extended paper feedcapability from third party feeder devices. Sheets are received froma third party feeder device through an entry slot located in the lastfeeder/stacker module of the system. The 96/4635/180 IPS controlsthe input sheet feeding in accordance with DFA specifications.Note: The 180 IPS has the option of a roll feeder that does notrequire the Input Enablement kit and is not enabled by DFA. Thisfeeder is installed in the inverter feeder/stacker module in the placeof the feeder tray.