Xerox 8850 Operator's Manual

Also see for Synergix 8850: User guide Setup guide User guide Release note Release note

Xerox 8850 Operator's Manual Manual pdf 57 page image

XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 477. Technical dataThis chapter provides the product and media specifications for theXES Synergix 8850 Printer. It also provides the spacerequirements for normal operation after product installation.Product specificationsTable 5. Hardware specificationsProcess speed 4.5 ipsResolution 400 dpiEnvironmental requirements Minimum: 60° F (10° C) at 20% relative humidityMaximum: 80° F (27° C) at 80% relative humidityMaximum elevation: 10,000 feet (3048 meters)Weight 575 lbs (261 kg)Dimensions Width:As delivered - 23 inches (584 mm)With output tray and AccXES controller installed - 62 inches (1575 mm)Depth: 57 inches (1448 mm)Height: 42.5 inches (1080 mm)Audible noise 67 db @ Max.Power consumption Typical power consumption for US 220V @ 20A:Warm-up – 4660 wattsStandby – 1000 wattsOperating – 2100 wattsRest - 120 wattsHeat output Warm-up: 14,500 BTU/hourStandby mode: 4,000 BTU/hourPrint mode: 7,200 BTU/hourFinishing Standard catch trayOptional on-line folderOptional Synergix Stacker