Xcruiser XDSR4000HD User Manual

Xcruiser XDSR4000HD User Manual Manual pdf 23 page image

23Auto DiSEqCPress [Blue] key to run Auto DiSEqCfunction, it can find the satellite connectto which port automatically.Blind ScanPress [White] key can directly into blindscan mode to scan the current satellite.10.2 Auto installation“Auto Installation” is a very new andconvenient function. It will automaticallydetect all dishes connecting to thismachine and scan the available servicesbelonging to the satellite matchedaccording to satellites and transpondersdata in current database. You don’t haveto input any parameter of your antennaWhen you complete your modification,Press [Red] key, it will show up a dialog toask you scan mode, program type, scantype and NIT Search on/off. After you setup, press [OK] key to start scanning.In the “TP Scan” item, press [Exit] key toexit the scanning and save the currentparameters.Single ScanPress [Red] key to show up a dialog toask scan mode (if you want to scan all oronly scan free channels), program type(means you want to scan all channels oronly scan TV/Radio channels), scan type(means preset scan, that is searching theexisted TP. Automatic Scan means blindscan. It is no need existed TP info) andNIT Search on/off. After you set up, press[OK] key to start scanning.Press [White] key into the blind scanningimmediately.TP ScanPress [Green] key to scan current TP’sprograms.When you press [Green] key, it willdisplay “New TP” in “TP Index” item;You should set the parameters of “TPFrequency” and “Symbol Rate” for thisnew transponder. The parameters of“TP Frequency” and “Symbol Rate”can set by number keys. The availablerange are “3000~13450 MHz” and“1000~45000Ks/s”.When you press [Yellow] key, there willshow up a warning message for remindingwhether you will delete the currenttransponder or not. If you select “Yes”,the current transponder will be deleted,and the total account of transponder willreduce 1 correspondingly.When you press [Blue] key, therewill show up a warning message forreminding whether you will delete alltransponders or not. If you select “OK”, alltransponders will be deleted.For the existed transponder, you alsocan use number keys to modify theparameters of “TP Frequency” and“Symbol Rate”.