Xblue Networks 45P Installation & Maintenance Manual

Also see for 45P: User guide Installation & maintenance manual Installation & maintenance manual Installation & maintenance manual

Contents

Xblue Networks 45P Installation & Maintenance Manual Manual pdf 156 page image

Resource156XBLUE NetworksTime Switching 6.4Data Range: 00:00 to 23:59Factory Setting (1—8): NullPress showUse next and back to select the alarm (1~8) to change.Press chgEnter the time for this Alarm/Reminder in 24-hour format.Press saveNotes:Erase Alarm/Reminder times by pressing “save” immediately after “chg”.Time SwitchingMBC - 4-07Time switching is used when the Service Setting is set to “Time”. When the system is in the“Time” mode, the system will automatically switch between Lunch Modes and Day/Nightmode. This can be overridden only at the attendant extension using the feature code Fea-ture 63 and entering the attendant extension password. Time Switching is programmed foreach of the seven days, Monday through Sunday. All times must be entered in 24 hour for-mat.Data Range: 00:00—23:59Factory Setting: All Days — Noon Start, Null — Noon End, Null — Night Start — 17:00,Night End — 08:00Press showUse back and next to select the Day to change.Press showThe current programming of “Noon Start” is displayed.Use back and next to select between time optionsPress changeInput the time for this mode change in 24-hour format.Press save