DPA Series — DPA80/DPA100 Operating Instructions Page 35taxOut 1 - Matrix Gain In A0.0 Off -40.0 +15.0Output Matrix GainsNote that this feature will only be displayed if the configuration for the amplifier or auxiliaryoutputs has been set to operate in “Full Matrix” mode , as opposed to “Free Assign” or astandard routing configuration (1 x 4 way, 2 x 2 way etc.)To use “Full Matrix” mode, please see the section about adjusting the configuration on page41.Initially, the “send” level from Input A will be selected — press ENTER to jump to the next“send” level for this output. Range is from -40dB to +15.0dB, with Mute one step below -40.0dB, whereupon the display will show “Off” as for Input B’s send level in the aboveexample.
