Whirlpool 920 Series Use And Care Manual

Also see for 920: Use and care guide Use and care guide Use and care guide Use and care guide Use and care guide

Starting a wash cycle1. Load the dishwasher. See the “Loading 5. Close door firmly until it latches.Your Dishwasher” section. -2. Spin the spray arms. They shouldturn freely.3. Add detergent. See the “Using the-Dispensers” section.4. Add rinse agent, if needed.6. Run hot water at the sink nearest thedishwasher until water is hot.Turn water off.7. Press a Cycle pad. If desired, press oneo-me,Ror more Option pads. See the= - - “Setting the Controls” section.The dishwasher starts fillingonce you press a cycle padunless you select the delaywash cycle. You may press Option padsas the machine is filling.The pad indicator glows red when a cycleI or an ootion is selected.Stopping the dishwasherYou can stop your dishwasher anytimeduring a cycle. All you have to do is:l Open the door slightly. Wait for any fillingor spraying action to stop before openingthe door all the way. Close door tocontinue cycle.ORl Press Cancel/Drain. Once pressed, a2-minute drain starts. See the “Setting theControls” section.6-