Whirlpool 4152821 Installation Instructions Manual

Installation Instructionsfor your new undercounterTRASH MASHER* COMPACTORBEFORE YOU USE YOUR COMPACTORBe sure your compactor is properly installed in an appropriate level area and a place suitable for the size, function andprotection of the compactor.ELECTRICALREQUIREMENTSObserve All Governing Codes and OrdinancesA 120-Volt, 60-Hz, AC only, 1!%Ampere, fused electrical supply is required. (Time delay fuse or circuit breaker isrecommended.) It is recommended that a separate circuit serving only this appliance be provided. DO NOT usean extension cord.RECOMMENDED GROUNDING METHODDO NOT, UNDER ANY CIRCUMSTANCES,REMOVE THE POWER SUPPLY CORDGROUNDING PRONG. 3-PRONGGROUNDING TYPEWALL RECEPTACLEFor your personal safety, this appliance must be grounded.This appliance is equipped with a power supply cord having a3-prong grounding plug. To minimize possible shock hazard,the cord must be plugged into a mating 3-prong grounding typewall receptacle, grounded in accordance with local codes andordinances. If a mating wall receptacle is not available, it is thepersonal responsibility and obligation of the customer to havea properly grounded. 3-prong wall receptacle installed by aqualified electrician. See figure 7.FIGURE I* Trademarks in Canada Used by Authority of Canadian Trademark Owner, WHIRLPOOL CORPORATION, U.S.A.- IMPORTANT-00 NOTREUOVETHISINSTRUCTIONSHEETUNTILREADYFORINSTALLATION.AlTEll COMPLETINGTHE/AfSTALl.ATIO/V,SAVETHESElMSTRUCTKJMSFOHFUTUREUSE.1 Part No. 4152821

/ 4

Related manuals for Whirlpool 4152821