Watts ENWARE DET685 Installation And Maintenance Instructions Manual

Watts ENWARE DET685 Installation And Maintenance Instructions Manual Manual pdf 1 page image

technical dataEnware products are to be installed in accordance with the Plumbing Code of Australia (PCA) and AS/NZS3500.Installations not complying with PCA and AS/NZS 3500 may void the product and performance warranty provisions.Reference should also be made to the Australasian Health Facility Guidelines (AHFG), ABCB and Local Governmentregulations when considering the choice of, and the installation of these products.This product must be installed and commissioned by a qualified plumber.For use with potable water only.NOTE: Enware Australia advises:1. Due to ongoing Research and Development, specifications may change without notice.2. Component specifications may change on some export models.DET685Installation and Maintenance InstructionsI00609_20 Jan 20241300 369 273 | info@enware.com.au | enware.com.auInlet Connection 1/2” BSP (15mm)Recommended Working Pressure 100 - 500 kPaRecommended Temperature Range 5 - 30 °COperating Temperature Range 0 - 50 °CDetention Push Button & Basin OutletAssembly - Spring Action Straight Valve