Menu
Vectrix VX-1 Manual
                                                                                      | |
Contents
| 
4-7Accessory Power OutletThe accessory power outlet (A) is located inside theglove compartment. It is for charging of a 12 volt wirelessphone. Lift the cover to access the outlet. Close thecover when not using the outlet. The device requirementsshould not exceed 0.5 amps (6 watts).ABattery ChargingCAUTION:• Use extreme caution when dealing with electricity.Use residual current device (RCD) or ground faultcircuit interrupter (GFCI) protected AC voltageoutlet.• DO NOT use non-grounded electrical plugadapters.• DO NOT use the charging cord if any part ofcharging cord is damaged.WARNING:• Do not use portable or stationary backupgenerating equipment to charge the scooter; thismay damage the scooter’s charging system.Only charge from a utility supplied voltage source.The appropriate AC voltage should be 120v/60Hzor 220v/50Hz.• Vectrix does not advise the use of extensioncords to charge the scooter. If you use anextension cord, it must be of the correct sizeto avoid excessive voltage drop. The extensioncord should be rated for 20 amps and NO longerthan 7.6 m (25 ft). |
Related manuals for Vectrix VX-1
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved