Vari Lite VLX3 User Manual

Contents

Vari Lite VLX3 User Manual Manual pdf 81 page image

MENU SYSTEM : MENU FUNCTIONS 402.97 03.000 1 A 1 7 Dec emb er 2 012 65Menu Function DefinitionsFor easy reference, each possible menu item is listed alphabetically in the first column by its displayabbreviation. The second column follows with a definition of the abbreviation and then a third columnprovides an explanation of its purpose and function.Table 4-2: Menu Function DefinitionsDisplay Definition Purpose10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.Address Address Accesses option for setting luminaire DMX starting address.All Seq All TestSequencesTests all internal mechanisms in sequence for X steps.Auto Automatic Opera-tionWhen set to "Auto", menu display will automatically orient itself is relation tofixture’s hanging or sitting position (up or down).Beam Sprdr Beam SpreaderMechanismSpecifies beam spread function for manual control (Manual or Test).Blue Blue LED Specifies Blue color (intensity) for manual control (Manual).CAL LEDs Calibrates LEDs To start LED calibration or to set LEDs to specific factory calibration levelChannel XXX DMX Channel Specifies DMX channel for display of current data value.CMD Lock Command Lock Selects whether to set Command Lock - to lock-out access to various settingsfrom the console using the Control Channel.Configure SystemConfigurationAccesses options for pan/tilt operation, LED Setup, dimmer operational set-tings, and Menu Display defaults.Constant Fans Fixture Mode Luminaire setup is in Constant Fans mode. This setting sets fans to maximumspeed and will keep them operating at full, regardless of LED junction temper-atures.Data DMX Data Accesses option for setting DMX address channel.Dim Curve Dimmer Operation Specifies dimmer to operate in Curve or Linear ModeDimmer Dimmer Specifies dimmer mechanism for manual control (Manual).Disable Disable Disables a function.Display Display Accesses options for Menu Display illumination time and orientation.Display Display Selects and sets menu display orientation of arrow direction. (Currently Dis-abled)Display Display Selects and sets menu display orientation of arrow direction. (Currently Dis-abled)Disp Tilt Menu orientationcontrolSets the orientation of the menu display to match the luminaire orientation,(Auto) automatic display orientation, standing (Up) or hanging (Down).DMX DMX Accesses options for DMX system settings.DMX Map Selects DMXMode OperationAllows users to select between four different DMX mapping operational modes- Mode 1, Mode 2, Mode 3, or Mode 4. See “DMX Operation” on page 22.Download Download Initiates download of luminaire software.Enable Enable Enables a function.Encoder Encoder Accesses pan/tilt encoders for diagnostic testing.