I NSTALLATION : ADDRESSING202.97 03.000 1 A 1 7 Dec emb er 2 012 19AddressingProgram Starting AddressThe address setting for DMX console controlled systems is entered using the Menu Display (refer to“Menu Operation” on page 58). The luminaire retains the DMX address even when power is removed.Note: Refer to your console operating instructions for specific information regarding its addressingrequirements.Program a DMX starting address:Step 1. Press [ESC] to access the main menu of the luminaire.Step 2. Press [Up] / [Down] arrows until Address appears. Press [Enter].Step 3. Press [Up] / [Down] arrows to enter starting address.Step 4. Press [Enter] to set.
