I NSTALLATION : INSTALLATION PROCEDURES202.9 678.00 19 0 31-July-2004 11Installation ProceduresHanging the LuminaireThe VL3500 series luminaire can be hung horizontally or vertically from any structure designed towork with the type of load created by this moving luminaire. Two mounting bracket assemblies(provided) are used to attach truss hooks or other mounting hardware as required. Many omp tibletruss hooks are available from different manufacturers for your particular needs.A minimum of one hook per truss hook bracket is required. If mounting method oes not use trusshooks, two attachment points per truss hook bracket are required. When attaching more than one pointon a single bracket, the attach points must be spaced as far apart as possible usin the suppliedmounting holes.Install mounting hardware and brackets:Step 1. Install truss hooks on two provided truss hook bracke as r quired.Figure 2-1: Installing Truss HooksNote: Various types of truss hooks can be used. The Mega Claw truss hook (as shown in the exampleabove) as well as many other standard hooks, can be ordered separately.Step 2 De rmine required configuration of bracket installation. Brackets may be installed in eithero ientation as shown.Figure 2-2: Bracket Orientation OptionsBracketExample TrussHook InstallationMega Claw Truss Hook(not provided)Truss Hook Hardw re(not provided)Bracketwww.carlosmendoza.com.mx