Valet System One Owner's Manual

Also see for System One: User manual Installation instructions

Contents

Valet System One Owner's Manual Manual pdf 8 page image

7SELECT CALLSA Select Call directs communication to a particular station or group of stations withinthe system with the exception of door stations.If your system has been programmed for double digit format to allow for more than eightSelect Call channels, refer to section “Initiating a Select Call – Double Digit Format” below.Initiating a Select Call - Single Digit Format:Press and hold the selection number (1-8) on the dialing keypad 20 at themaster or any room stationThe green light will turn on indicating your microphone is activeCommence your conversation then release the key to listen for a replyThe green light will turn off at the initiating station and will turn on at the receivingstation(s) enabling the person(s) receiving the call to reply* Those replying to a call need not press any buttons. All replies are ‘hands free’Continue the conversation by pressing the selected number to talk and releasingthe selected number to listenWhen the conversation is complete the system will reset after approximately20 seconds from when the selected number was last released or the systemcan be reset manually by pressing the ‘CANCEL / CLEAR’ key 3Initiating a Select Call - Double Digit Format:Press the first digit of the selection number (1-3) on the dialing keypad 20at any room stationThe red light will begin flashingPress and hold the second digit of the selection number (1-8) on the dialing keypadThe green light will turn on indicating your microphone is activeCommence your conversation then release the second digit key to listen for a replyThe green light will turn off at the initiating station and will turn on at the receivingstation(s) enabling the person(s) receiving the call to reply* Those replying to a call need not press any buttons. All replies are ‘hands free’Continue the conversation by pressing the second digit key to talk and releasingthe second digit key to listenWhen the conversation is complete the system will reset after approximately20 seconds from when the second digit key was last released or the systemcan be reset manually by pressing the ‘CANCEL / CLEAR’ key 3