Valet System One Owner's Manual

Also see for System One: User manual Installation instructions

Contents

Valet System One Owner's Manual Manual pdf 12 page image

11Changing Room Station CodingFor the purpose of Select Calling (Calling individual or grouped stations) each station must beallocated a number between 1 and 8 (Single digit) or 11 and 38 (Double digit). If more than onestation is allocated the same number, the stations having the same number will form a group.Allocating a number to a station, is done by means of programming via the keypad.Single DigitEnter a number between 1 and 8 by pressing the corresponding buttonThe Red LED will repeatedly flash the programmed number while in program modeDouble DigitEnter a number in the ranges of 11 to 18, 21 to 28 or 31 to 38The Red Led will quickly flash twice, then flash the first digit and then flash thesecond digit.This sequence will continue to flash while in program modeExit Program ModeExit program mode by pressing the “CLEAR” button