Val Controls IHP24-A Hardware Manual

Also see for IHP24-A: Hardware manual User manual Manual

Contents

Val Controls IHP24-A Hardware Manual Manual pdf 18 page image

DHW-UM-002Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600vc@valcontrols.com • www.valcontrols.comRevision: 318/205.4 SIL – PS1, PS3, DO11, DO12A device with an internal SIL Expansion Card can be installed in a SIL 1-4 installation withoutaffecting the SIL level. Device can be equipped with 4 different types of SIL Expansion Cards.The units are approved for installation in SIL 1-4 circuits, if installed as described in this manual.1X - SIL expansion card 2X - SIL expansion card1XDO11DO12PS1Ixx242XDO11DO12PS1Ixx24PS23X - SIL expansion card 4X - SIL expansion card3XDO11DO12PS1Ixx24PS34XDO11DO12PS1Ixx24PS2PS3X Relay 1 Relay 21 Normally close Normally open2 Normally close Normally close3 Normally open Normally open4 Normally open Normally close5.4.1 TerminalsPower supply Digital output5. PS2 (+)6. PS2 (-)21. PS1 (+)22. PS1 (-)51. PS3 (+)52. PS3 (-)23. DO11 (+)24. DO11 (-)25. DO12 (+)26. DO12 (-)Note: The PS1, PS2 and PS3 must be galvanic isolated.

/ 20

Related manuals for Val Controls IHP24-A