38 User ManualFig. 3.7a - Nearest Lakes listThen choose the lake you want and press [ENTER]: the Full Info page is shown.Finding Lakes By NameTo select the lakes By Name function following the procedure:[MENU] + "FIND" + [ENTER] + "LAKES BY NAME" + [ENTER]Shows the list of all lakes stored on the C-CARD in alphabetic order. Pressing[MENU] to insert the Lake name.Finding Points Of InterestSearches for nearest Points Of Interest (POI):[MENU] + "FIND" + [ENTER] + "POINTS OF INTEREST" + [ENTER]A sub-menu is opened to find different categories of Points Of Interest.Finding CoordinatesTo center the map at given coordinates:[MENU] + "FIND" + [ENTER] +"COORDINATES" + [ENTER] + use the cursorto insert coordinates + [CLEAR]3.8 ALARMSThe chart plotter provides alarms for various functions. You can enter the desiredalarm range for each function.Arrival AlarmTo set an acoustic alarm to sound when the vessel is approaching the destination.[MENU] + [MENU] + "ALARMS" + [ENTER] + "ARRIVAL ALARM" + [ENTER]XTE AlarmTo set an acoustic alarm to sound when the vessel is deviating from a defined course.[MENU] + [MENU] + "ALARMS" + [ENTER] + "XTE ALARM" + [ENTER]Anchor AlarmTo set an alarm to sound when the ship moves off the current ship's position location.[MENU] + [MENU] + "ALARMS" + [ENTER] + "ANCHOR ALARM" + [ENTER]NOTE By the time the Anchor Alarm is set the current ship's position is saved asorigin position. The alarm goes off when the ship moves away from the originposition more than the entered alarm range.Depth AlarmTo set an acoustic alarm to sound when the received depth value (from the depthtransducer) is too shallow.
