Menu
VCS VideoJet 100 Manual
Also see for VideoJet 100: Manual
                                                                                                                      | |
Contents
| 
Configuration with web browser68VideoJet 100Service settingsWith these settings, you can integrate the VideoJet 100 into anexisting network.Network settings IP address:Enter the desired IP address of the device here. The desired IPaddress must be valid for the network.Subnet mask:Enter the corresponding subnet mask here if the device is to com-municate via a subnet.Gateway IP address:Enter the corresponding IP address here if the device is to indepen-dently set up a connection from the local network. Otherwise thefield can be left blank (0.0.0.0).Attention!If you change the IP address and transmit the new configuration tothe VideoJet 100, the device can then only be selected via the newaddress. |
Related manuals for VCS VideoJet 100
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved