- 79 -MS926 User’s Manual4.6.3.1 Idle Illumination - Presentation ModeScan one of the bar codes below to set the LED illumination for the scannerwhen it is in an idle state in Presentation Mode. Default = High.Note: If you use one of the lower Idle Illumination settings, and there is not enough ambientlight, the scanner may have difficulty detecting when a bar code is presented to it. If thescanner has difficulty “waking up” to read bar codes, you may need to set the IdleIllumination to a brighter setting.Note: LED Illumination - Presentation Mode does not apply to Poor Quality PDF Codes orMobile Phone Read Mode.High*MediumLow4.6.3.2 Presentation SensitivityPresentation Sensitivity is a numeric range that increases or decreases thescan engine's reaction time to bar code presentation. To set the sensitivity,scan the Sensitivity bar code, then scan the degree of sensitivity (from 0-20)from the inside back cover, and Save. 0 is the most sensitive setting, and 20is the least sensitive. Default = 1.Sensitivity
