Unitech MS340B Quick Start Manual

Also see for MS340B: User manual

Contents

Unitech MS340B Quick Start Manual Manual pdf 1 page image

MS340B BT CCD Barcode ScannerQuick Start GuideScanner ModeA. SPP Master Mode*SPP Master Mode*B. SPP Slave ModeSPP Slave ModeNote : When control the BT device tosearch the scanner, enter pin code(default 00:00:00) to setup comport.C. HID Slave ModeHID Slave ModeNote : When control the BT device tosearch the scanner, enter pin code(default 00:00:00) to setup pairing.Auto Mode Enable *Auto Mode DisableA. Auto ModePAN ConfigurationVersion 1.0Battery ChargingUse the MS340B for the first time, you will need tofully charge the battery.It takes approximately 5hours to fully charge the battery.1. Plug the adapter cable into the power socket on thebottom of cradle.2. Plug the AC adapter cord into an electrical outlet.3. Place the scanner in the cradle. The scanner LEDwill be red to indicate charging and turn green whenit is fully charged.Note : The scanner must scan theBT MAC address code located onthe bottom of the cradle afterscanning “SPP Master Mode” barcode.Configuration Flow Chart (Please scan the following barcodes for configuration)Scan Start of ConfigurationStart ConfigurationScan all necessary labels for parametersthat meet applicationsInterface SelectionRS232 Mode ParametersReading Mode SelectionSymbologies SelectionScan End of Configuration toend the programmingEnd ConfigurationTo permanently save the settings byyour programmed,just scan lablel forSave Parameters.Save ParametersB. Sleep ModeSleep Mode OFF*Sleep Mode 1 min. ONSleep Mode10 min. ONBatch Mode OFF*Batch Mode ONC. Batch ModeDelete Last Data **Batch Data Read **Batch Data Clear *** : Default Option* * :Quick Setting LabelThe function can be executed directly by scanning barcode instead of following the configuration flow chart process.For more detailed scanner setting, please go to www.ute.com to download the user manual and thescanner configuration manager utility.

/ 2

Related manuals for Unitech MS340B