Unitech MS340 Quick Start Manual

Also see for MS340: User manual Quick start guide

Contents

Unitech MS340 Quick Start Manual Manual pdf 1 page image

MS340Step 1: Getting Started ( For USB Cable )Tips for Switching CableQuick Start GuideStep 2: Test & FinishOpen a word processing program such asMicrosoft Word or Notepad on your host. Nowscan the following barcode:If the word “unitech” appears on the screen youhave succesfully installed your scanner.Congratulations!Installing the scanner to the Host System1. Connect the USB cable of MS340 to the USB port on your host PC.2. After six beeps, MS340 is successfully connected with your host PC,then the driver will be started to install automatically.3. Please go to step 2: Test & Finish.Before removing the cable from the scanner, it is recom-mended that the power on the host system is off and thepower supply has been disconnected from unit.1. Find the small "Pin-hole" on thebottom of the unit.2. Use a bended regular paperclipand insert the tip into the hole.3. You will hear a "click", then gentleon the strain- relief of the cableand it will slide out of the scanner.Pin-holeConfiguration Flow Chart (Please scan the following barcodes for configuration)KeyboardUSB*RS232Virtual COMInterface Selection Reading Mode SelectionGood Read OFF TestingContinuous / Auto Power ONFlash / Auto Power OnContinuous/Trigger OFFTrigger ON / OFF* FlashPresentation* : Default Option** : For more detailed scanner setting, please go to www.ute.com to download the user manual andscanner configuration manager utility.

/ 2

Related manuals for Unitech MS340