6. Advanced use61How to designate a code name/code tableFor designating a code name, input the code name, and for designating a code table, input the tablenumber. There are some restrictions in interface for designating a code name/code table.Select whether to designate a code name or code table and whether to use front panel keys or anoptional interface under [22: Code Name Selection Method] in the setting mode.Selecting with front panel keysPress [A] → [ENT] ( [B] → [ENT] on Bch) in the print mode, anda code name selection state is developed. In the case of a code name, input by the sameoperation as the abovementioned method of registration. In the case of a code table, it isrequested to input the table number, so press [Del] four times, and then input a 2-digit number.(If the first digit and the second digit are the same, press [Del] once after inputting the first digit,and then input the second digit.)Selecting through an optionSee the explanations for each option.(Note) Codes that can be selected through the BCD input are only numbers,spaces and hyphens.Code table numbers can be selected through an option only to Ach. Selection cannot be made to Bch.List of methods of code name/code table selectionCode Code tableAch Bch Ach BchFront panel keys ○ ○ ○ ○BCD input △ (Note) × ○ ×RS-232C ○ × ○ ×List of code table registration methodsCode tableAch BchFront panel keys ○ ○BCD input × ×RS-232C × ×Note
