unigreen 7Refer to the enclosed handbooks for the use and maintenance of the pump andpressure regulator and any accessories or motors.b) Please contact the agent in your zone, the nearest authorised workshop orUNIGREEN S.p.A. directly for any repairs the user feels they aren’t capable ofperforming alone. (see point 8.5)c) Due to the complexity of the equipment and the variety of technologies used(mechanical, hydraulic, oil-pressure and electrotechnical) operators must notdismantle or modify the equipment. All of the relevant operations must be performedby specialised personnel, authorised by UNIGREEN S.p.A.2.4.1 TAKING PRECAUTIONS AGAINST FIRE HAZARDSDon’t use naked flames or heat sources near the machines.The sprayers are made with many materials that derive from petroleum: tanks,tubes, pipes and hoses, wheels and plastic parts; furthermore the presence ofoils of various nature and residues of chemical products make them potentiallyflammable.2.5 WEATHER CONDITIONSWe recommend spraying in the early hours of the morning or late in the afternoon,avoiding the hottest time of day.Never do any spraying if it’s raining or rain is forecast.Don’t spray in strong wind or in any case, in winds above 3/5 m/second.If you have to spray in windy conditions, use relatively low pressures to obtainquite large drops that are less sensitive to drifting (being heavier the wind hasless effect). There are also special anti-drift nozzles available from UNIGREENS.p.A.; for information, please contact our offices.2.6 MACHINES DESIGNED TO BE USED ONLY WITH CLEAN WATERThere are versions of the machines designed only to be used with a hose reel forwashing with cold clean water.These machines cannot be used with chemical products as they don’t have someof the devices or accessories that are needed to use these products safely.These machines are identified by the word “washing” on the CE plate.2.7 DRIVING ON THE ROADThe CAMPO series atomisers are not specifically designed for road use.Nevertheless, many models are also available in the version homologated forroad traffic with the tank empty.You should check with your local reseller on the correct couplings to use and usetractors that meet the regulations in force.3 CHARACTERISTICS AND SPECIFICATIONSThis handbook is valid for tractor-mounted sprayers to be used with:a) horizontal booms per herbaceous cultivations (herbicides, insecticides,fungicides, foliage nutrient, etc.)d) treatments with hand lances with or without a hose reele) hand lances for washing with or without a hose reelThe UNIGREEN S.p.A. sprayers are identified by the CE plate (FIG. 2) bearingone of the marks indicated in the tables of the allowed fittings (TABLE N° 12 pag.33-34). The tables above contain a summary of the indications envisaged for themarkings.3.1 TABLES OF FITTINGS ALLOWEDTable N° 12 let you identify the version of your machine indicating the basicequipment and all the possible fittings available (optional).You can also find the other fittings allowed or other versions to meet your require-ments in the future.THE FITTING DEFINED IN TABLES N° 12 (pages 33-34) SHOULD BE CONSID-ERED BINDING FOR THE VALIDITY OF THE DECLARATION OF CONFORM-ITY.Other fittings or setups of basic components and optionals should be consideredunsafe and therefore are not covered by the guarantee and aren’t UNIGREEN’sresponsibility.The same goes for fittings realised with components or accessories that aren’toriginal UNIGREEN parts.UNIGREEN accessories can easily be identified by the label with the yellowbackground “ORIGINAL UNIGREEN ACCESSORY”TYPE : .......................................................................code: ........................................ N˚ ...........................massa a vuoto: ..........................Kg. max press. : ........... barnet massmassa totale ammessa: .............................. Kg.total massvia Rinaldi, 105 - Reggio Emilia ITALIAANNOYEAR20 .......made inItalyFIG. 2