Menu
Unigreen Campo 11 Use And Maintenance Manual
                                    | |
Contents
| 
10 unigreen4.3.1 TOWED SPRAYERSPARKINGDon’t stand the sprayers on unstable ground or steep slopes, the machine isdesigned to be parked safely on compact ground with a slope of up to 8.5°using the relevant chocks (FIG. 3) in the following way:- Machine parked with drawbar uphill (max 8.5°), place the chocks behindthe wheels.- Machine parked with drawbar downhill (max 8.5°), place the chocks in front ofthe wheels.- Machine parked across the slope (max 8.5°), place one chock in front of thedrawbar wheel (in the direction of the slope) and the other in front of the wheeluphill.MOVING THE MACHINEFor lifting, please refer to the general notes above.CAMPO sprayer models 11 and 16 are fitted with a tilting parking wheel whichallows the machine to be pushed over firm, flat ground when the tank is empty.CAMPO sprayer models 22 and 32 are fitted with a tilting parking foot.To make it easier to move the sprayer when it is not attached to the tractor, themachine and the drawbar are specially equipped for stowing:- The cardan shaft: swivelling cradle on drawbar.- The electrical pressure regulator: hosereel support (the pushbutton panel isnormally attached to the tractor or stored in the product basket).4.4 TRACTOR COUPLING= The tractor must be equipped with a 1”3/8 ASAE DIN 9611/A at 550 rpmpower-takeoff capable of supplying the power necessary for operating themachine.= It must have a towing hitch (towed mistblowers with a towing eye or forkdrawbar) and a three-point elevator (for mounted machines and a steeringdrawbar for towed machines) suitable for safely bearing the weight of themistblower.= It must be able to tow the maximum overall mass of the machine.All of the characteristics required are indicated in the fittings tables N° 12pages 33-34 (the total mass is also indicated on the CE plate on the machine).WARNING: make sure there are no persons or things near themistblower before starting the machine and while you are using it.4.4.1 STANDARD VERSION (ELEVATOR COUPLING)= Check the diameter of the elevator coupling pins. If necessary position thedouble diameter pins correctly; there are also appropriate adapter bushesavailable.= Check that the weight on the hook can be supported by the tractor (themaximum weights on the drawbar are indicated in the fittings tables N° 12pages 33-34).= Check that the steering joint is lubricated with grease.= Keep the towed machine level with the control of the elevator.= Retract the parking drawbar wheel (or foot) so it doesn’t get damaged duringwork.B: to perform these operations, check the stability of the machine and observeall the indications relevant to safety in the paragraphs 4.3 TRANSPORTATIONAND MAINTENANCE, 8 MAINTENANCE, and 8.5 REPAIRS.= Position the pressure regulator in a place where it is easy to reach from thedriver’s seat. Don’t carry liquids under pressure inside the cabin; use therelevant electrical or cable controls for these tractors.= Check that the pipes of the pressure regulator (or the electrical cables on apushbutton control panel) don’t get in the way and are positioned at a safedistance from the cardan shaft and the wheels of the tractor.Hinged parking wheelHinged parking standTractor coupling for Towed machines:standard version, with elevator coupling.Tractor coupling for homologated Towedmachines in work position (not suitable forroad use).FIG.3 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved