Uniden BEARCAT 980 Owner's Manual

Also see for BEARCAT 980: Manual para el usuario Guide d'utilisation

Contents

Uniden BEARCAT 980 Owner's Manual Manual pdf 11 page image

E-11Selector clockwise to move to the next channel or counter-clockwise to move to the previous channel. The radiocontinues scanning in the selected direction.• To change to Memory Channel Scan mode, press MEM/SCANwhile in All Channel Scan mode (see page 10).3. To exit All Channel Scan mode, press PTT, 9/19/NORM, WEATHER,or CB/PA.Weather moDe (WX moDe)Your radio combines a CB radio with a Weather radio and a WeatherAlert system. The Weather Alert system sounds a 7-second signal in theevent of severe weather when in CB mode. The Weather radio continuallybroadcasts weather conditions when you are in Weather mode.1. Press WEATHER. Your radio is now in Weather radio mode.2. Select 1 of 7 weather channels using Channel Selector.You cannot change ANL or NB settings while in WX mode. The radio willsound an alert tone.Set Weather Scan ModeWeather Scan mode allows the radio to move to the next weatherchannel if no signal is detected after 3 seconds. Set Weather Scan modeto ON or OFF through the menus.1. Press MENU/OK to activate the menus. COLOR displays.2. Turn the Channel Selector knob to cycle through the menu op-tions until WXSCAN displays.3. Press MENU/OK. ON displays.4. Press MENU/OK to set Weather Scan mode to ON or turn the selec-tion knob until OFF displays and then press MENU/OK to set it.WXSCAN displays again.If Weather Scan is ON when you turn off the radio, it remains ON.