Uniden BCD436HP Owner's Manual

Also see for BCD436HP: User manual

Contents

Uniden BCD436HP Owner's Manual Manual pdf 82 page image

74Weather ScanPress Channel to hold on any channel/frequency. Press Func then press and hold 6(WX).The scanner starts scanning the preprogrammed weather frequencies and stops on the first goodsignal. If the signal is lost, the scanner resumes searching for another weather transmission.Change ChannelTurn the Scroll Control.AttenuationPress Func then 4(ATT).Intermediate Frequency ExchangePress Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.Replay the Last TransmissionsRecording starts when the scanner receives an Alert in Weather Alert.Press Replay.Press Channel to pause/resume replay.Turn the Scroll Control to select recordings.Quick SearchPress Func then E/yes to start Quick Search at the current frequency.Weather MenuPress Func then Menu.Weather alertThis setting turns on weather alert and determines which types of signals will trigger an alert. Seealso Program SAME.Press Channel to hold on any channel/frequency.Press Func and then press and hold 6(WX). Press Func then Menu.Scroll to Weather Alert and press E/yes.Alert Only - The scanner will scan all the weather channels and immediately sound aweather alert siren when it detects the 1050 Hz weather alert tone. Press any key to stop thesiren which opens the squelch and the scanner remains on the weather channel.SAME 0-4 - The scanner sounds a weather alert siren for any programmed county(ies). Thescanner displays warning level as “Warning WX”, “Watch WX” or “Advisory WX” and itdisplays decoded Event Code.When an alert is received, press any key to listen to the alert.All FIPS - The scanner sounds a weather alert siren for any county.