Uniden BCD436HP Owner's Manual

Also see for BCD436HP: User manual

Contents

Uniden BCD436HP Owner's Manual Manual pdf 52 page image

44Latitude - Bottom RightEnter the latitude. Press ./no to toggle N or S, and press E/yes.Longitude - Bottom RightEnter the longitude. Press ./no to toggle E or W, and press E/yes.Stored RectangleEdit Rectangle See Rectangles above.Delete RectangleAt Confirm Delete? press E/yes or ./no.P25 Waiting Time (Motorola Only) – This setting gives the scanner time to determine if channelson mixed Motorola Systems have digital or analog transmissions. During this time, the scanner willevaluate the received signal and, if it detects digital data, will open squelch immediately. If digitalis not detected before the delay expires, the scanner will open squelch at the end of this delay.This is to prevent “false decode” problems. This setting only affects channels with an Audio Typeset to All. The default setting is 400 ms.0 to 1000Note: Any analog transmissions will lose the first part of the transmission, up to the waittime you set here.P25 Threshold Mode (P25/Motorola)The default setting is Auto.Auto. Automatically sets the decode threshold based on the received signal.Manual. Allows you to manually set the threshold in threshold setting mode by using the P25Threshold Level setting.Default. Sets the scanner to the default threshold of 8, Auto.P25 Threshold Level (P25/Motorola) – The default setting is 8.0 to 20Delete Site – Deletes the Site.At Confirm Delete? press E/yes or ./no.New Site – See New Site.proGrammInG departmentsneW department/department optIonsPress Menu then scroll to Manage Favorites and press E/yes.Scroll to the Favorites List and press E/yes.Scroll to Review/Edit System and press E/yes.Scroll to the System and press E/yes.Scroll to Edit Department and press E/yes.To Create a New Department, scroll to New Department and press E/yes.To Edit an Existing Department, scroll to the Department and press E/yes.