ENDAT-GX201 USER’S MANUALUNICORN COMPUTER CORP.- 1 -ENDAT-GX201User’s ManualRev. 1AFor GX201 PCB ver. 1C or later03/02/2007ENDAT-GX201 USER’S MANUALUNICORN COMPUTER CORP.- 2 -Copyright NoticeThe content of this manual has been checked for accuracy. The manufacturerassumes no responsibility for any inaccuracies that may be contained in thismanual. The manufacturer reserves the right to make improvements ormodification to this document and/or the product at any time without priornotice. No part of this document may be reproduced, transmitted, photocopied ortranslated into any language, in any form or by any means, electronic, mechanical,magnetic, optical or chemical, without the prior written permission of themanufacturer.AMD is registered trademark of AMD Technology IncorporationGEODE and GEODE GX is registered trademark of AMD Technology IncorporationRealtek is registered trademark of Realtek Technologies Inc.Multiscan is a trademark of Sony Corp of AmericaIBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks ofInternational Business Machines CorporationIntel is a registered trademark of Intel CorporationPlug and Play is registered trademarks of Intel CorporationMicrosoft, Windows and MS-DOS are trademarks of Microsoft CorporationAMI is a trademark of American Megatrends Inc.PCI is a registered trademark of PCI Special Interest GroupOther product names mentioned herein are used for identification purpose only andmay be trademarks and/or registered trademarks of their respective companies.Installation NoticeThe manufacturer recommends using a grounded plug to ensure propermotherboard operation. Care should be used in proper conjunction with a groundedpower receptacle to avoid possible electrical shock. All integrated circuits on thismotherboard are sensitive to static electricity. To avoid damaging components fromelectrostatic discharge, please do not remove the board from the anti-static packingbefore discharging any static electricity to your body, by wearing a wrist-groundingstrap. The manufacturer is not responsible for any damage to the motherboard dueto improper operation.