USR-G806 User Manual Technical Support: h.usriot.comJinan USR IOT Technology Limited www.usriot.com24Figure 29 APN configurationTo choose the network type, please configure the LTE.Figure 30 LTE configuration3.4.9 VPN Client3.4.9.1 PPTP ClientWe first create VPN Server on the server.Open the network connection page on the server (remote server) and click File - > New incoming connection.Then, select Add account, please enter user name, password and other information..Click Next and check through Internet to connect to this computer.Then, select "Internet Protocol Version 4" to set the properties of the incoming IP, IP address assignmentselect "Specify IP Address", then select "OK" and "Allow Access".Now we create a VPN server.Let's talk about the use of VPN Client. We are looking for a computer in the LAN to ensure that it can accessthe server above. Then create a new VPN connection.In the connection box, click "Properties", the tab can set the target address (the address of the VPN server),security options to select "PPTP protocol", after the point is determined, enter the username, password.