U-Line H-3800 Quick Start Manual

U-Line H-3800 Quick Start Manual Manual pdf 1 page image

PAGE 1 OF 2 0313 IH-3800π H-38006' STEEL ROLLINGSCAFFOLD1-800-295-5510uline.caPARTS FOR BASE UNITASSEMBLY INSTRUCTIONS FOR BASE UNITNOTE: Identify all components according tochart above. If any components are missing ordamaged, contact Uline Customer Service.1. Attach each side brace (C) to end frames (A) at thedesired platform height. Be sure the locking pins oneach side brace are fully locked in the end frame atall 4 locations. (See Figure 1)2. Install platform (B) so that it is fully seated and levelin both side braces (C) Be sure the deck pins are inthe engaged position. (See Figure 2)3. Install 4 casters (E) into both end frames (A) andsecure with snap pins (D). (See Figure 3)WARNING! Side braces must be level andlocked before using. All 4 casters must belocked before use. Follow all applicable ANSIand OSHA guidelines along with province andlocal codes for use of the product.ACEBD# DESCRIPTION QTY.A End Frame 2B Platform 1C Side Brace 1D Snap Pin 4E 5" Caster 4LockedUnlockedEngagedDisengagedLockedUnlockedFigure 1Figure 2 Figure 3

/ 2

Related manuals for U-Line H-3800