U-Line Echelon 2115RS00 Installation Manual

Also see for Echelon 2115RS00: Use and care guide Specifications

Contents

U-Line Echelon 2115RS00 Installation Manual Manual pdf 14 page image

2115R — Refrigeratorwww.U-LineService.com 14 08/2006Installation of the 2115R1. Plug in the power cord.2. Gently push the unit into position. Be careful not toentangle the electrical cord.3. Re-check the leveling, from front to back and side toside. Make any necessary adjustments. The unit’s topsurface should be approximately 1/8" below thecountertop.Relocating the ShelvesBoth the glass shelves in the refrigerator and the innerdoor shelves can be moved to accommodate your bottles,cans and containers.Glass Shelves1. Open door fully, grasp shelf firmly, lift front edgeslightly, and pull straight out.2. Choose new location and slide shelf onto theappropriate rib.Door Shelves1. First pull shelf up at a 45°angle, then straight out(see Figure 34).2. Choose new location andline up on bosses. Firstpush straight in, thendown at a 45° angle.Installation TroubleshootingProblemQ:The door remains open unless it is pushed closed.SolutionA:The hinges should be self-closing when the door is openapproximately 8". If this is not the case, make sure theclosers (at the bottom of the hinge pin) are clean, greasedand installed correctly. Also, re-check leveling from frontto back of the unit and readjust if necessary. Make surethat pivot plate is installed correctly.ProblemQ:The custom overlay door was designed to align with therest of the cabinet doors, but the unit has crept forward.SolutionA:Make sure that the electrical cord is not obstructing theinstallation.8 Install the UnitBossNotchFigure 34

/ 16

Related manuals for U-Line Echelon 2115RS00