11 U-Line Self Closing DoorsReversing Black or White Doors• The Hinge hardware will be removed and reinstalled on theopposite side of the cabinet.• The top hinge hardware will be reinstalled on the bottom of theopposite side of the cabinet.• The bottom hinge hardware will be reinstalled on the top of theopposite side of the cabinet.Remove Door1. Hold door to keep it from falling.2. Remove hinge screw pin (1) from top hinge using a Phillipsscrewdriver.3. Remove door by tilting forward and lifting door off bottom hingecloser inserts.4. Reinstall hinge screw pin (1) into top hinge using a Phillipsscrewdriver.Remove hole plugs.Remove plastic screw plugs (three each, top and bottom) (3)from new hinge location. Save for reinstallation later.Remove existing top hinge.Remove existing top hinge (three screws) (2).Reinstall hinge to bottom opposite.1. Install the hinge just removed from the top to the BOTTOMopposite side of the cabinet (three screws) (2).2. Remove the two door closer inserts (4) from the existingbottom hinge.3. Install door closer inserts as shown on the new bottom hinge(4).31244