U-Line ADA151M Install Manual

Also see for ADA151M: Use and care guide Features and specifications

Contents

U-Line ADA151M Install Manual Manual pdf 5 page image

Prepare Site 4Your U-Line product has been designed for either free-standing orbuilt-in installation. When built-in, your unit does not requireadditional air space for top, sides or rear. However, the front grillemust NOT be obstructed and clearance is required for anelectrical and water connection in the rear.IMPORTANTIMPORTANTUnits can NOT be installed behind a closed cabinet door.Cut-Out DimensionsADA15IM ModelsBI-95(B)(WH) ModelsBI-98 / SS-98 ModelsBI-2115 ModelsSP-18 Models4 Prepare Site23-3/4”Minimum15-1/4"32"to33"See ElectricalSpecificationsfor Power Supply8"8"TypicalCounterHeight34-1/4"to35-1/8"Cut-OutHeight25-1/16"Filler Panel (Not Provided by U-Line) –May Be Added Above or Below Unitto Enclose for a Built-In Look14-3/16"18-1/2" MinimumSee ElectricalSpecificationsfor Power Supply8"TypicalCounterHeight34-1/4"to35-1/8"Cut-OutHeight27-3/8"Filler Panel (Not Provided by U-Line) –May Be Added Above or Below Unitto Enclose for a Built-In Look15-3/16"21-1/2"MinimumSee ElectricalSpecificationsfor Power SupplySee ElectricalSpecificationsfor Power Supply34-1/8"to35-1/8"15-1/4"8"23-7/8"MinimumCut-OutHeight18-7/8"26" MinimumSee ElectricalSpecificationsfor Power Supply8" HeightFrom FloorFiller Panel (Not Provided by U-Line) –Needed to Attach Mounting Flange on UnitToe Kick14-1/4"Cut-Out Width3/4"Minimum FlangeMounting Area3/4"Minimum FlangeMounting Area3/4”Minimum FlangeMounting Area