FAQ for Wi-FiUser's Manual B-43. Set your Pocket PC as 802.11 Ad Hoc Mode and choose the sameSSID to join the 802.11 Ad Hoc Network (choose the DHCP to get theIP assigned).4. Check and make sure the Wireless LAN Adaptor in the 802.11 Ad HocNetwork have the same IP group. (Please Ping each other to makesure the connection is successful)5. Now you can access the LAN resource successfully.B7: What should I do if my host computer cannot wirelessly connectwith my Pocket PC?1. Make sure you have setup the partnership for your Pocket PC andyour host computer.2. Make sure you are within the range of a working network.3. Make sure you have entered the IP address of the host computer asthe WINS server on your Pocket PC.4. Reset your Handheld PC or Pocket PC to make the TCP/IP settingstake effect5. Make sure the SSID, WEP keys and channel for all devices in thenetwork are set the same.6. Make sure the channel been set is in the range of 1~11.C. ApplicationC1: What should I do to use the ActiveSync Function throughWireless Network?1. Make sure you have already setup the partnership for your Pocket PCand your host computer through USB Interface and the ActiveSynccan work properly. (The ActiveSync connection Interface should alsochoose the Ethernet interface for Wireless LAN ActiveSyncConnection)2. Make sure you are within the range of a working Wireless Network.3. Make sure you can Ping your Pocket PC from your Host Com- puter.(Make sure the SSID, WEP keys and channel for all devices in thenetwork are set the same.)4. Make sure you have entered the IP address of the host computer asthe WINS server on your Pocket PC.5. Reset your Pocket PC to make the TCP/IP settings take effect andexecute the ActiveSync function in the Pocket PC to enjoy the highspeed ActiveSync Wirelessly.
