Toshiba e-STUDIO 407CS Series Printing Manual

4.PRINTING FROM UNIX/LinuxPrinting From Application 1474 PRINTING FROM UNIX/Linux Department CodeThe department code can be set using the following option.A department code is specified within 63 characters.If the entered department code is longer than 63 characters, it is clipped to 63 characters when a job is sent.The following characters are invalid for department codes:" & ' ( ) ; < > ^ ` | ~ @ # % * ! How the equipment performs printing for an invalid department code print job, for which an invalid department codeis specified, varies depending on the Invalid Department Code Print Job setting that can be set in the TopAccessAdministrator mode and whether SNMP communication is enabled or not.- When SNMP communication is enabled and Invalid Department Code Print Job is set to [Store to invalid joblist], an error message will be displayed when an invalid department code is entered.- When SNMP communication is disabled and Invalid Department Code Print Job is set to [Store to invalid joblist], the invalid department code print job will be stored in the invalid department code print job list withoutprinting.- When the Invalid Department Code Print Job is set to [Print], the invalid department code print job will beprinted.- When the Invalid Department Code Print Job is set to [Delete], the invalid department code print job will bedeleted. For the appropriate department code, ask your system administrator. Distinguish Thin LinesThis sets whether to distinguish thin lines or not. This mode can be set using the following option.Example: The command to set the thin line limit mode is “lp -o thinlinelimit=on ”. Do Not Print Blank PagesThis sets whether or not a blank page is printed. This mode can be selected using the following option.Example: The command to set the blank page mode is “lp -o blankpage=0 ”. Toner SaveThe toner save mode can be set using the following option.Example: The command to set the toner save mode is “lp -o tonersave=on ”.Option Value Alternate Value Descriptiondept=code Set the department code. A department code within 63characters comes in [code].Option Value Alternate Value Descriptionthinlinelimit=on ON Set the thin line limit mode.thinlinelimit=off OFF Cancel the thin line limit mode.Option Value Alternate Value Descriptionblankpage=0 Set the blank page mode (disable Do not Print BlankPages).blankpage=1 Cancel the blank page mode (enable Do not Print BlankPages).Option Value Alternate Value Descriptiontonersave=on ON Set the toner save mode.tonersave=off OFF Cancel the toner save mode.

/ 204

This manual is suitable for:

e-STUDIO 407CS Series

Toshiba e-STUDIO 407CS Series Printing Manual

Product

Learn More

Legal